With this optional serger accessory, you can measure, cut and finish all in one step.
Your Janome serger is already the fastest way to finish a seam. You can cut off your excess fabric and give the seam a finished edge all in one pass.
Now you can add one more time-saving function. With the optional Cloth Guide you can do all of the above while automatically measuring your seam allowance.
It's easy to set up and easy to use.
How To Use The Serger Cloth Guide To Accurately Measure A Seam
- Begin by attaching the Cloth Guide to the machine: Open the front cover and loosen the screw on the front. Slide the attachment behind the screw, and tighten in place.
- Attach the Standard foot to the serger.
- Set up the serger for a 4 thread overlock stitch, with both needles in place. (But the guide can be used for any serger stitch.)
- Use the marks on the machine front cover to align the guide. Then set the guide to your desired seam depth.
- Position your fabric against the guide.
- As you begin stitching, the machine will cut off the precise seam allowance.
To see this demonstrated, watch the video Cloth Guide: Accurately measure and cut seam allowances.
Find the Cloth Guide and all the other optional accessories for your serger at your local Janome dealer.
Watch The Serger Cloth Guide Video
