The Janome Fashion & Finishing Accessory Kit.
This kit is packed with 5 different presser feet, essential for both tailoring and making clothing. All 5 feet are made for Oscillating Hook Models (Front Loading) with a max stitch width of 5 MM
Click Here for more information on this Kit
1. Straight Stich Foot
The Straight Stitch Foot is often used on very fine or very heavy fabrics. This foot is flat on the underside to provide an even pressure against the feed dogs and it has a rounded needle hole which offers the benefit of more support around the needle to prevent skipped stitches and puckering.
2. Overedge Foot
Use with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent unraveling. The foot guides the fabric and keeps your edges flat by compensating for the lack of friction with a small brush when the needle makes the right-most stitch.
3. Rolled Hem Foot
The unique twist at the front of this foot allows you to feed fabric in on a rolled edge, rather than a flat seam. This takes all the work out of creating the rolled hem.
4. Ultraglide Foot
The Ultraglide Foot is molded from a special resin, allowing easier sewing of fabrics such as ultra suede, faux leather and plastic that may otherwise stick to the standard metal foot.
5. CONCEAL® Zipper Foot
CONCEAL® zippers can be smoothly sewn by using this CONCEAL® zipper Foot. Position the zipper teeth under the proper groove in the foot and sew the zipper tape and fabric together.