http://www.janome.com/fusetalk/forum/index.cfm?forumid=1 FuseTalk Basic Edition http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2337 2009-11-18T11:36:20 -05.00 paulakay 1 http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2332 2009-11-17T18:01:09 -05.00 hilldweller 1 http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2326 2009-11-16T11:12:26 -05.00 Diana1963 8 I have the 6600P which I really like. I find I need a free arm from time to time and I also miss some of the decorative stitches I had with my 9000 ( I traded it up for the 6600 about 18 months ago).

I have found both the 4400 and 4800qc for $699 brand new in the box online. I did call my dealer who advised me they would have the same motor, etc as the MC4000, which I had years ago, but sold because I was buying a combo machine.

I have never bought online, only through my dealer, whom I get excellent customer support. However, they do not have these machines since they are older models and my budget won't allow the cost for the MC5200.

I would like to know if anyone has either of these machines and what you like and dislike about them. I really liked my 4000, which sewed through anything because of the extra needle penetration power. This is why I am looking at these two models.

I will hopefully be making my purchase within the next 2 weeks.

Thanks!
Diana ]]> http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2311 2009-11-12T12:13:12 -05.00 sdh 3
I've been using the same machine for 35 yrs, (a nice old Riccar) and my daughters have convinced me it's time to get a new one. I'm completely lost with all the new technology, so any feedback is much appreciated! There isn't a good fabric/craft store nearby, so I'll probably order a machine online. I need something for garmet construction, and I"d like to get more into quilting and crafts. My budget is limited, so I don't want to go over $400-ish.

Thank you!
sdh ]]> http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2304 2009-11-10T19:28:21 -05.00 tlee 4 http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2297 2009-11-09T10:42:05 -05.00 prowland 2 Thanks Pam ]]> http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2296 2009-11-08T20:39:34 -05.00 Mark 1
Can anyone please suggest Janome models that are capable of doing this. So far a search of the site did not specifically mention this capability.

Also, since the company where I'm employed in Southern California is really only looking for a service to add this feature to one of their products, I need to locate a subcontractor that can use the appropriate Janome machine. If Janone can provide a referral to a subcontractor, please provide a contact where the details can be discussed.

Thanks in advance for any suggestions. ]]> http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2294 2009-11-08T18:49:35 -05.00 JuliesGrammy 4
I now have more time on my hands, and decided I'd like to get back into sewing after 25 years, and possibly machine quilting. Am currently considering a Janome 6260QC, which I understand is a discontinued model. The machine is new (not previously used), available through a local dealer, and still carries the warrantee. It would be my only machine, and I would be taking it back & forth to classes. The price is $589.00.

Does anyone have any feeling one way or the other if this is a good choice. I'm a little skeptical buying a discontinued model, but I suppose all the current models will be discontinued one day or another. Does anyone have any insight into how the 6260QC rated against the lower priced / higher priced Janomes?

Thanks for any feedback. I really need to sort out my brain!! ]]> http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2291 2009-11-08T10:04:40 -05.00 Ariyana 2 Can anyone help me out here by providing a manual or a link to a manual?
Thanks! ]]> http://www.janome.com/fusetalk/forum/messageview.cfm?catid=13&threadid=2289 2009-11-07T11:05:17 -05.00 terrynoittingham 4

I would appreciate your views.

Thanks Terry ]]>