Forum Home | Choosing a Janome Machine

Topic

shirleyi
By: shirleyi
Posts: 5
low or high shank
Which is the MC9500 machine
Replies

  1. RE: low or high shank

    If it is an embroidery machine it is probably high shank. I'd check with your dealer to be sure.

    Cheryl
    Posted: Aug 29 2017 By: CherylAnn
  2. RE: low or high shank

    Your machine is a high shank 7 mm clip on feet.
    Posted: Sep 16 2017 By: digimad2
  3. RE: low or high shank

    thanks, was wondering about that. is there a even feed or walking foot to fit this machine?
    Posted: Oct 15 2017 By: shirleyi
  4. RE: low or high shank

    Yes, there is one. Your dealer should be able to help you out with that.

    Cheryl
    Posted: Oct 16 2017 By: CherylAnn
  5. RE: low or high shank

    I see you got your answer. I own that machine also - It is actually a pretty goo machine. They don't make it anymore but sews and embroideries. I have had pretty good luck with it. I have the walking foot. It's ok just have to make sure to let it do the work and don't over guide it.
    Posted: Nov 20 2017 By: pennymae
  6. RE: low or high shank

    Would love to know if the MC6600 and the 3160QDC are low or high shank machines. Would think that would be in the manuals. Thanks
    Posted: Nov 25 2017 By: LindaMac
DEALERS
The TWO Closest Dealers to you are:
203 WASHINGTON ST. , OCCOQUAN VA, 22125
(703) 490-1536
http://www.seweasysewing.com
9600 MAIN STREET, Unit L , FAIRFAX VA, 22031
703.261.6366
http://www.quiltersstudiova.com
Find Additional Dealers