Machines
$499 MSRP
Own this machine already?
Register your warranty

The MOD-8933 gives you a wide range of serging features in a compact machine. Its sturdy design and precise Janome stitch mechanism ensures beautiful 3/4 thread operation. The MOD-Serger is the perfect companion for the developing fashion enthusiast. This wonderful modern serger gives you the necessary features in a compact machine to make beginner denim projects.

*Available on Amazon.com

Click here for the MOD Landing Page. 

Key Features
  • 3 and 4 Thread Convertible
  • Easy Lay-in Tension Dials
  • Threading Chart
  • Color Coded Thread Guides
  • Tension Release Lever
  • Easily Accessible Lower Looper
  • Quick Change Rolled Hem
  • Lower Looper Pretension Setting Slider
  • Easily Retractable Upper Knife
  • Adjustable Foot Pressure
  • Snap-on Presser Feet
  • Adjustable Stitch Length 1mm to 4mm
  • Differential Feed Ratio 0.5mm to 2.25mm
  • Adjustable Cutting Width 3.1mm to 7.3mm
  • Maximum Speed: 1,300 SPM
Model Comparison
MOD-8933
Sergers
Number of Threads 3_and_4_thread_serger
Type of Tension Manual_Dials
Presser Foot Snap-On
Cover Stitch Capability No
Threading Easy Lay-In
Pattern Selection Stitch Information Display
Threading Chart Yes
Color Coded Thread Guides Yes
Tension Release Lever Yes
Easily Accessible Lower Looper Guides No
Changeable Thread Guide No
Quick Change Rolled Hem Yes
Lower Looper Pretension Setting Slider Yes
Cover Stitch Changeover Device No
Easily Retractable Upper Knife Yes
Adjustable Foot Pressure Yes
Built in Two Thread Converter No
Flip Needle System
Stitch Length Adjustment 1mm to 4mm
Differential Feed Adjustment 0.5mm to 2.25mm
Cutting Width Adjustment 3.1mm to 7.3mm
Maximum Speed 1,300 SPM
Machine Weight 14.3lbs
Cover
Other Features
Everyone is Talking about MOD-8933
Reviews
Average 4.0 | 4 Reviews


Tako
Wednesday, November 23, 2016

cpindzola
Saturday, December 17, 2016

I like the concept, but the directions are "sloppy." Nowhere in the supply list does it mention the felt or the batting (how much?). Also, I would never use a high loft batting in a placemat, or a table runner, as I think that it would be too unstable for a glass. The next time I make these, I will cut out the batting (I use flannel) and spray baste it to the wrong side of the Dresden plate before I put the Dresden plate on the felt to cut out. I have not yet washed the finished placemat, and am hoping that the single layer of felt does not curl up, or become distorted after washing/drying.
Txmaid
Tuesday, February 21, 2017

MargieARK
Friday, February 24, 2017

I made this today but your cutting directions need to be changed. You only need 4 of color 1 and color 3 4.5 squares for the triangles. Also the inner border, you only need 2 cuts as WOF is long enough to cut each in half to fit the sides.

Please login to post a review
DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 110 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 LUANNE DR , GAITHERSBURG MD, 20877
301-527-0598
www.capitalquilts.com
Find Additional Dealers