Machines
$599 MSRP
Own this machine already?
Register your warranty

The CoverPro 900CPX is a coverstitch machine with a wide array of convenient features. Its extra wide bed space and free arm capabilities make it easy to accommodate a wide array of projects. You'll also find a Quick Reference Chart on the front of the machine, so you can choose the perfect stitch and stitch settings without consulting the manual. Janome's exclusive Seam Tightening System (STS) reduces slack in the looper thread, giving you tight, flat, and sturdy stitches on any type of fabric. You'll love what you can accomplish with the 900CPX - and so easily!

*Available at Authorized Janome Dealers

Key Features
Free arm
Extra large bed space
Differential feed
Speeds up to 1,000 spm
Quick stitch selection guide
  • Seam Tightening System (STS)
  • Free arm
  • 1 or 2 needle
  • Quick reference sticker for stitch selection
  • 1 needle, 2 thread chain stitch
  • 2 needle, 3 thread cover stitch
  • Extra large bed space
  • Vertical needle drop
  • Tension release device
  • Foot pressure adjustment
  • Differential feed ratio 0.5 to 2.25
  • Stitch length 1 to 4mm
  • Stitch width 5mm
  • Speeds up to 1,000 spm
  • Soft cover included
Model Comparison
CoverPro 900CPX
Sergers
Number of Threads
Type of Tension
Presser Foot
Cover Stitch Capability No
Threading
Pattern Selection Stitch Information Display
Threading Chart No
Color Coded Thread Guides No
Tension Release Lever No
Easily Accessible Lower Looper Guides No
Changeable Thread Guide No
Quick Change Rolled Hem No
Lower Looper Pretension Setting Slider No
Cover Stitch Changeover Device No
Easily Retractable Upper Knife No
Adjustable Foot Pressure No
Built in Two Thread Converter No
Flip Needle System
Stitch Length Adjustment
Differential Feed Adjustment
Cutting Width Adjustment
Maximum Speed
Machine Weight
Cover
Other Features
Everyone is Talking about CoverPro 900CPX
Reviews
Average 4.0 | 4 Reviews


Tako
Wednesday, November 23, 2016

cpindzola
Saturday, December 17, 2016

I like the concept, but the directions are "sloppy." Nowhere in the supply list does it mention the felt or the batting (how much?). Also, I would never use a high loft batting in a placemat, or a table runner, as I think that it would be too unstable for a glass. The next time I make these, I will cut out the batting (I use flannel) and spray baste it to the wrong side of the Dresden plate before I put the Dresden plate on the felt to cut out. I have not yet washed the finished placemat, and am hoping that the single layer of felt does not curl up, or become distorted after washing/drying.
Txmaid
Tuesday, February 21, 2017

MargieARK
Friday, February 24, 2017

I made this today but your cutting directions need to be changed. You only need 4 of color 1 and color 3 4.5 squares for the triangles. Also the inner border, you only need 2 cuts as WOF is long enough to cut each in half to fit the sides.

Please login to post a review
DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 110 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 LUANNE DR , GAITHERSBURG MD, 20877
301-527-0598
www.capitalquilts.com
Find Additional Dealers