Machines
$399 MSRP
Own this machine already?
Register your warranty

The 8002D serger provides professional results at an extraodinary value. This 3 and 4 thread convertible serger cuts, sergers and finishes seams in one quick and easy motion. The external color coded tension dials allow for easy threading and the rolled hem changeover device makes it easy to convert to a rolled hem. You'll love the difference the 8002D will make in your sewing!

*Available at Authorized Janome Dealers

Key Features
3 and 4 thread convertible
Lay-in thread tension dial
Color coded thread guides
  • 3 and 4 thread convertible
  • Lay-in thread tension dial
  • Threading chart
  • Color coded thread guides
  • Changeable thread guide
  • Quick change rolled hem
  • Easily retractable upper knife
  • Adjustable foot pressure
  • Snap on presser feet
  • Adjustable stitch length 1 to 4mm
  • Differential feed ratio from 0.5 to 2.25
  • Adjustable cutting width from 3.1mm – 7.3mm
  • Speeds up to 1,300 spm
Model Comparison
8002D
Sergers
Number of Threads 3_and_4_thread_serger
Type of Tension Manual_Dials
Presser Foot Snap-On
Cover Stitch Capability No
Threading Dial Threading
Pattern Selection Stitch Information Display
Threading Chart Yes
Color Coded Thread Guides Yes
Tension Release Lever No
Easily Accessible Lower Looper Guides No
Changeable Thread Guide Yes
Quick Change Rolled Hem Yes
Lower Looper Pretension Setting Slider No
Cover Stitch Changeover Device No
Easily Retractable Upper Knife Yes
Adjustable Foot Pressure Yes
Built in Two Thread Converter No
Flip Needle System
Stitch Length Adjustment
Differential Feed Adjustment 0.5mm to 2.25mm
Cutting Width Adjustment 3.1mm to 7.3mm
Maximum Speed 1,300 SPM
Machine Weight 13.4 lbs
Cover
Other Features
Everyone is Talking about 8002D
Reviews
Average 4.0 | 4 Reviews


Tako
Wednesday, November 23, 2016

cpindzola
Saturday, December 17, 2016

I like the concept, but the directions are "sloppy." Nowhere in the supply list does it mention the felt or the batting (how much?). Also, I would never use a high loft batting in a placemat, or a table runner, as I think that it would be too unstable for a glass. The next time I make these, I will cut out the batting (I use flannel) and spray baste it to the wrong side of the Dresden plate before I put the Dresden plate on the felt to cut out. I have not yet washed the finished placemat, and am hoping that the single layer of felt does not curl up, or become distorted after washing/drying.
Txmaid
Tuesday, February 21, 2017

MargieARK
Friday, February 24, 2017

I made this today but your cutting directions need to be changed. You only need 4 of color 1 and color 3 4.5 squares for the triangles. Also the inner border, you only need 2 cuts as WOF is long enough to cut each in half to fit the sides.

Please login to post a review
DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 110 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 LUANNE DR , GAITHERSBURG MD, 20877
301-527-0598
www.capitalquilts.com
Find Additional Dealers