Machines
$899 MSRP
Own this machine already?
Register your warranty

The 1110DX Pro makes serger sewing easy! Incorporating the differential feed system of two feed dogs, puckered edges on woven fabrics and stretched edges on knits are virtually eliminated. The rolled hem conversion feature eliminates the need to change the needle plate, foot or tension setting for rolled hemming. Restructured lower looper guides allow easy access. The included threading card and color-coded guides are easy to follow for 2, 3 or 4 thread serging.

*Available at Authorized Janome Dealers

Looking for inspiration?
Join the Janome community
Key Features
2,3, and 4 thread convertible
Color coded thread guides
Easily accessible lower looper guides
  • 2,3, and 4 thread convertible
  • Easy lay in threading
  • Threading chart
  • Color coded thread guides
  • Tension release device
  • Easily accessible lower looper guides
  • Changeable thread guide
  • Quick change rolled hem
  • Lower looper pretension setting slider
  • Easily retractable upper knife
  • Adjustable foot pressure
  • Snap on presser feet
  • Adjustable stitch length 1mm to 5mm
  • Differential feed ratio 0.5 to 2.25
  • Adjustable cutting width 3.1mm to 7.3mm
  • Maximum speed 1,300 spm
  • Waste chip box
  • Soft cover included
  • Metal base
Model Comparison
1110DXPro
Sergers
Number of Threads
Type of Tension
Presser Foot
Cover Stitch Capability No
Threading
Pattern Selection Stitch Information Display
Threading Chart No
Color Coded Thread Guides No
Tension Release Lever No
Easily Accessible Lower Looper Guides No
Changeable Thread Guide No
Quick Change Rolled Hem No
Lower Looper Pretension Setting Slider No
Cover Stitch Changeover Device No
Easily Retractable Upper Knife No
Adjustable Foot Pressure No
Built in Two Thread Converter No
Flip Needle System
Stitch Length Adjustment
Differential Feed Adjustment
Cutting Width Adjustment
Maximum Speed
Machine Weight
Cover
Other Features
Everyone is Talking about 1110DXPro
Reviews
Average 4.0 | 4 Reviews


Tako
Wednesday, November 23, 2016

cpindzola
Saturday, December 17, 2016

I like the concept, but the directions are "sloppy." Nowhere in the supply list does it mention the felt or the batting (how much?). Also, I would never use a high loft batting in a placemat, or a table runner, as I think that it would be too unstable for a glass. The next time I make these, I will cut out the batting (I use flannel) and spray baste it to the wrong side of the Dresden plate before I put the Dresden plate on the felt to cut out. I have not yet washed the finished placemat, and am hoping that the single layer of felt does not curl up, or become distorted after washing/drying.
Txmaid
Tuesday, February 21, 2017

MargieARK
Friday, February 24, 2017

I made this today but your cutting directions need to be changed. You only need 4 of color 1 and color 3 4.5 squares for the triangles. Also the inner border, you only need 2 cuts as WOF is long enough to cut each in half to fit the sides.

Please login to post a review
DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 110 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 LUANNE DR , GAITHERSBURG MD, 20877
301-527-0598
www.capitalquilts.com
Find Additional Dealers