The Tape Binder is used for finishing and covering the raw edge of stretch fabrics. The binder folds the fabric you wish to use as tape around the raw edge as you sew, allowing you to make beautifully finished necks and arm holes and bind any raw edge with ease.
Follow these simple steps to load the binding into your tape binder, for insertion to your next project!
1. Insert the fabric to be used as tape through the tape guide.
2. Guide the tape through the tape guide by gently pulling the end with the tip of the tweezers.
3. Pull out the end while using the tweezers to help insert the tape between the upper and lower guides at the end of the tube, and then slide the tape under the presser foot.
