Software Lessons

Deleting Designs from the MC11000 via USB Cable

What you'll learn 
You'll learn how to delete designs from the Memory Craft 11000 via USB Cable once you have finished using them. The MC11000 can store a lot of designs in its built-in memory, but if the memory becomes full, you will not be able to send additional designs. 

1. Click MemoryCraft, SendDesigns, Receive and Delete...
Image


OR 

Click the down arrow to the right of the Send a Design icon. Click Designs
Image
Either way will bring up the Send Designs, Receive and Delete (On-line) dialog box. 

Customizer 11000 will automatically send a request over the USB cable to the MC11000 to receive a list of folders in the Built-in memory. This is done because communicating with the Built-in memory is the default choice for the Send Designs, Receive and Delete dialog box. 
Image


The Send Designs, Receive and Delete dialog box is divided into three sections. 

1. The left side of the box shows folders and designs on your PC. 

2. The right side of the box shows folders and designs on the MC11000. 

3. The middle part of the box has three buttons for the action you want to do to communicate between the PC and the embroidery machine. 
Image
The sequence to delete designs from the MC11000 is:

  1. Choose the memory on the MC11000 where the designs are written.
  2. Choose the folder in the memory.
  3. Select the designs you want to delete.
  4. Click the Delete action button.


Step 1. Choose the memory on the MC11000 where the design is written
The Built-in Memory is the default. 
Image

Note:If you have a compact flash card (ATA card) or USB Memory Key in your MC11000 and you wish to delete a design from its memory, click the device button. Customizer will send a request over the USB cable to the MC11000 to receive information about the folders on the device you selected. It will indicate the name of the memory you are using in the Folder: box as well as showing you the folders in its memory.


Image 

Step 2. Choose the folder in the memory
In Step 2, we tell Customizer where the designs are stored. The designs we sent to the MC11000 are in folder Embf, so double click the folder to open it to see the designs

Step 3. Select the designs you want to delete
Click on the designs you want to delete
A check mark will be placed in the check box indicating these designs are selected. 
Image

Step 4. Click the Delete action button
Image

After you click the Delete action button, you will get a confirmation dialog box asking you if you really want to perform a deletion. If you want to proceed, click the Yes button

Image

When you choose that you want to delete, you will get a Delete Designs dialog box. Click the Delete Start button to start the deletion process.

Image

The designs will be deleted from the folder on the MC11000.

DEALERS
The TWO Closest Dealers to you are:
196 Boston Post Road , Orange CT, 06477
203-878-1654
19 PUTNAM AVENUE , PORT CHESTER NY, 10573
914-934-2934
Find Additional Dealers