You'll learn how to delete designs from your flash media once you have finished using them.
What you'll learn You'll learn how to delete designs from your flash media once you have finished using them. 1. Click FlashMemory, Write Designs, Read and Erase...OR Click the down arrow to the right of the Send a Design icon. Click Designs. Either way will bring up the Write Designs, Read and Erase (Off-line) dialog box. The Write Designs, Read and Erase dialog box is divided into three sections. 1. The left side of the box shows folders and designs on your PC. 2. The right side of the box shows folders and designs on a compact flash (ATA card) or a USB Memory Key in your computer. 3. The middle part of the box has three buttons for the action you want to do to communicate between the PC and the embroidery machine. The sequence to erase from flash memory is:
Step 1. Choose the flash media device where the designs are written. Click on the device in the Flash Memory section to select it.Step 2. Choose the folder in the memory.In Step 2, we tell the Customizer where the designs are stored. The designs we sent to the flash memory are in folder Embf, so double click the folder to open it to see the designs. Step 3. Select the designs you want to delete. Click on the designs you want to delete. A check mark will be placed in the check box indicating these designs are selected. Step 4. Click the Erase action button. After you click the Erase action button, you will get a confirmation dialog box asking you if you really want to perform a deletion. If you want to proceed, click the Yes button. The designs will be deleted from the folder on the flash media.
Copyright ©2016 Janome America, Inc. All Rights Reserved.